Without category

Showing all 4 results

  • Out of stock
     
     Crafters need a very specific mix of alloys in solder to get a smooth and clean solder bead for glass work. 
     
    This solder is composed of 60% tin and 40% lead which allows it to melt at a lower temperature. 
     
    This solder creates a rounded bead. Contains 1 pound of solder.
     

    These tin-lead solders can be used to join copper and most copper alloys, lead, nickel alloys and steel. 

  • Out of stock
     
     Crafters need a very specific mix of alloys in solder to get a smooth and clean solder bead for glass work. 
     
    This solder is composed of 60% tin and 40% lead which allows it to melt at a lower temperature. 
     
    This solder creates a rounded bead. Contains 1 pound of solder.
     

    These tin-lead solders can be used to join copper and most copper alloys, lead, nickel alloys and steel. 

  • Out of stock
    1/2   Lb Spool
    MEETS ASTM B32 *
    Manufactured in the European Union

    Excellent for   joining of copper tubing in refrigeration and air conditioning applications.

    Also used in piping and fittings for drinking water systems (Suitable for potable water)

    May be used in the dipping of wire harnesses.

    This solder is useful for applications where moderately elevated temperature is a factor.

     With a higher electrical conductivity and high fluidity, it is recommended for lead free installation of small diameter, tight fitting connections.

    Not recommended for use on brass.

    NOMINAL SOLDER COMPOSITION:
    Tin
    Balance
    Antimony
    4.5-5.5%

    PHYSICAL PROPERTIES: Mechanical properties of bulk solder
    Solidus
    452°F(233°C)
    Electrical Resistivity
    145 n Ω·m at 77 °F (25°C)
    Color
    Gray Silver
    Liquidus
    464°F(240°C)
    Hardness
    15HB
    Density
    8.52 g/cm3
    Shear Strength
    11,100 psi (Cu to Cu)
    Tensile Strength
    14,200 psi (Cu to Cu)
    Electrical Conductivity
    11.9% IACS at 68°F (20°C)
    Elongation in 4”
    38%

  • Out of stock

    1  Lb Spool

    MEETS ASTM B32 *

    Manufactured in the European Union

    Excellent for   joining of copper tubing in refrigeration and air conditioning applications.

    Also used in piping and fittings for drinking water systems (Suitable for potable water)

    May be used in the dipping of wire harnesses.

    This solder is useful for applications where moderately elevated temperature is a factor.

     With a higher electrical conductivity and high fluidity, it is recommended for lead free installation of small diameter, tight fitting connections.

    Not recommended for use on brass.

    NOMINAL SOLDER COMPOSITION:
    Tin
    Balance
    Antimony
    4.5-5.5%

    PHYSICAL PROPERTIES: Mechanical properties of bulk solder
    Solidus
    452°F(233°C)
    Electrical Resistivity
    145 n Ω·m at 77 °F (25°C)
    Color
    Gray Silver
    Liquidus
    464°F(240°C)
    Hardness
    15HB
    Density
    8.52 g/cm3
    Shear Strength
    11,100 psi (Cu to Cu)
    Tensile Strength
    14,200 psi (Cu to Cu)
    Electrical Conductivity
    11.9% IACS at 68°F (20°C)
    Elongation in 4”
    38%

X
Open chat
1
💬 Need help?
Hello 👋
Can we help you?
Powered by