110 volt unit
- Exclusive : Free Arm/Pipe/Tube/
Support (14.99 Value)
“All other offers show the arm in the listing but the fine print says you need to buy it separately !”
- Exclusive : 3 Power Settings Selector : 1870W – 3200W – 4500W “All other offers y have 1 or 2 power settings”
- Exclusive : 17 inch Coated Wire Harness for Safety
- “All other offers have a 6 inch duplex wire ,user has to join wire near splash zone”
- Exclusive Design on Nipple/Pipe/Tube Support : New 2 part design conceals wire harness inside tube revealing an exquisite and slender configuration instead of ugly exposed wired coming out of the showerhead (see photos)
ELECTRIC SHOWER HEAD TANKLESS HOT WATER HEATER 110 V
BRAND NEW ! FACTORY SEALED BAG
READY TO INSTALL
3 LITERS MINUTE (46 GAL /HOUR – 0.8 GAL /MIN)
Retails for $99 at stores
Check out our feedback from satisfied customers!
You are buying the world famous CORAL MAX ELECTRIC SHOWER HEAD TANKLESS HOT WATER HEATER
PERFECT FOR POOL SIDE HOT SHOWER RINSE OFFS, ALSO GREAT FOR CABINS WHERE YOU DON’T REALLY NEED A HOT WATER HEATER PLUS ALL THE EXTRA PIPING.THESE SHOWER HEADS ARE USED IN 80 % OF ALL HOUSEHOLDS IN BRAZIL AND THEY WORK GREAT. OPERATES ON 110 – 120 VOLTS .YOU ONLY NEED TO CONNECT IT TO THE NEAREST CIRCUIT BREAKERREQUIRES A 40 AMP BREAKERYOU WILL NEVER RUN OUT OF HOT WATER. EVERYONE GETS A HOT SHOWER.WORKS GREAT EVEN WITH 2PSI WATER PRESSURE UP TO 150 PSI.
With remarkable electronic technology that requires the outstanding Coral heater saves up to 25% in electic bills.
Compact Exquisite Design:
The water heater’s compact design, the size of shower head, takes up reduced space and attractively decorate modern living spaces.
This amazing instant water heater is designed for one point of use at a time. It is Ideal for small apartments, flats, hunting cabins and small homes as well as boats, campers, RV’s and mobile homes.
It delivers over 40 gallons of hot water an hour with a 45 degree rise in temperature. This means that if your tap water is at 65 °F, it will instantly deliver 40 gallons of hot water an hour of water at 110 °F.
Infinite applications can be found for the extraordinary Excel tankless water heater. Our customers also use them for washing stalls,horse trailers, de-icing cars in the winter, outdoor camping, RV ´s, motels, small roadside restaurants and other situations where endless and economical water heating is required .
Used in Australia, Europe and Japan for many years, this technology is now revolutionizing the way we heat water in America.
Bid Now : Buyer will pay shipping
PAYMENT TERMS PAYPAL www.paypal.com , Credit Cards via Paypal.
|Typical Flows and use Temp. for Fixtures
Flow Rates in Gals/ Minute Temperature in degrees °F
|Flow Rates||0.8 – 1.5||1.0 -1.5||1.5- 3.0||1.0 -1.5||2.0-4.0||1.0-1.5||1.5-2.0|
|Use Temp.||80°to 105°||100° to 105°||105° to 115°||90° to 105°||105° to 115°||80° to 95 °|
|RULE OF THE THUMB PERFORMANCE CRITERIA|
|This unit is suitable for only one point of use at a time .
Recommended for incoming cold water temperature above 50°F, however it can take lower incoming temperatures down to 40°F by reducing water flowrate
This amazing instant water heater is designed for one point of use at a time and it can be connected to the existing hot water piping. It is Ideal for small apartments, flats , hunting cabins and small homes as well as campers , RV’s and mobile homes.
Infinite applications can be found for the extraordinary Coral tankless water heater. Our customers also use them for washing stalls, horse trailers, de-icing cars in the winter , outdoor camping, RV ´s, motels, small roadside restaurants and other situations where endless and economical water heating is required.
CORAL ELECTRIC POINT OF USE INSTANT WATER HEATER:
Shower head with integral water heater built in. Use for space restricted and portable applications such as boats, pool, camp facilities, hunt cabins and RV.
You can have a fully functional hot water shower system at a fraction of the normal equipment cost and installation time normally required.
This self-contained shower system only uses electricity when operated.
The unit will operate properly with a low water pressure of 2 PSI up to 150 PSI.
Installation steps summary:
1) Remove your existing shower head and extension, just leave the ½? hole in the bathroom wall..
2) Install the showerhead
3) Run Water thru the showerhead, this will fill the water cavity where the resistance is lodged.
4) Make sure you have a 50 Amp circuit breaker to your existing breaker box and run wires to the shower head unit. See circuit current requirements in table below. TURN OFF THE BREAKER!
5) Connect the power wires to the shower head unit , no polarity is required
6). TURN ON THE BREAKER. The unit is ready for use, just open the fixture and hot water will instantly come out, you can decrease temperature by increasing water flow.
If the plumbing does not have 1/2″ thread, use an adapter.
The height of the water tank must be at least 1 meter above the shower head, in cases of LOW water pressure (1.5 Psi to 10 Psi) the flow restrictor should be removed (see figure 4).
For pressure between 80 and 400 kPa (8 and 40 mca.) or municipal water source, it is necessary to keep the flow restrictor. (see figure 4)
Install the water connection and fill with water before making the electrical connection, this prevents burnout of the resistance heating element.
Always repeat this operation should the product be removed.