One endconnects to 3 / 4? (1620) GASFLEX,… (3/4″ size: nominal 16 mm ID x 20 mm OD; 0.625″ ID x 0.787″ OD) and the other endi s a 1/2″ female NPT… Screw compression brass fitting three- piece body construction…
GasFlex piping system
GasFlex piping system
Showing 17–32 of 77 resultsSorted by price: low to high
-
-
1/2″ Female NPT Brass Ball Valve… . 1/ 2″ female NPT..
- Working pressure: 500PSI/500WOG
- Material: Stainless Steel 304
- Medium: Water, Gas, Oil
- Working temperature: -4 Degrees to 356 Degrees
- Blow-out proof stem
1/2″ Inch Stainless Steel Ball ValveHome Brew ValveShower Head Shut Off Valve -
Brass Pipe Nipple 1/2″ Male NPT X 1/2″ Male NPT Fitting Fuel, Oil, Gas, Water (1/2 size: nominal … brass construction…
-
gasFlex Triple Reamer flaring Tool Good for 1/2″ (1216)
-
gasFlex Triple Reamer flaring Tool Good for 1 ” (2025 ) and 3/4″ (1620) gasFlex PIPE
-
Internal Bending Spring for PEX-AL-PEX gasFlex… Good for 1″ (2025) gasFlex flexible PIPE… Great for those tight spots at the end of the installation…
-
EXTERNAL Bending Spring… Good for 3/4″ (1620) gasflex flexible PIPE… Internal dimensions of this spring are 18mm+ , used for bending 18mm OD Multilayer pipe… Great for laying around obstacles and installing gas lines…
-
Out of stock1 UNIT… TEE WITH MALE 1/2″ NPT fitting… Two ends connects to 1 / 2 (1216) gasflex pipe… (1/2 size: nominal 12 mm ID x 16 mm OD)and the other ends a 1/ 2″ male NPT… Screw compression brass fitting three- piece body construction… CE approved…
-
1/2″ Female NPT Brass Ball Valve… . One endconnects to 1 / 2″ (1216) gasflex pipe… and the other end is a 1/ 2″ female NPT… (1/2″ size: nominal 12 mm ID x 16 mm OD)…
-
1/2″ Female NPT Brass Ball Valve… . 1/ 2″ female NPT..
-
1/2″ Female NPT Brass Ball Valve… . 1/ 2″ female NPT..
-
1 UNIT… 1/2″ EQUAL TEE for gasflex… Three endsconnect to 1/2″ gasflex 1216 pipe… (1/2″ size: nominal 12 mm ID x 16 mm OD PEXALPEX.) 1216 x 1216 x 1216 same as 1/2″ x 1/2″ x 1/2″
-
1 unit 90 DEGREE ELBOW fitting BOTH ENDS connect to 1” (2025) Gasflex tubing / pipe Screw compression brass fitting three- piece body construction
-
3/4″ gasflex… For Size 1620 gasFlex pipe – 20mm diameter pipe… TUBING CLIPS… This new practical design results in a productive installation and pipe layout . Clips are screwed on first and the pipe or tubing is then…
-
1″ 2025 PIPE MALE NPT fitting… One end connects to 1″ (2025) GASFLEX,… (1″ size: nominal 20 mm ID x 25 mm OD; 0.8″ ID x 1 ” OD)and the other end’s a 1 ” MALE NPT… Screw compression brass fitting three- piece body construction better than • Flexible gas piping • Flexible gas tubing • CSST • Gastite • Omegaflex • Wardflex • Firepit • NFPA 54 • ANSI-AGA LC1 • Csst safety
-
1 UNIT… 3/4″” EQUAL TEE for gasflex… Three endsconnect to 1/2″ gasflex 1216 pipe… (3/4″ size: nominal 16 mm ID x 20 mm OD gasflex)